There are two types of rod ends: oil lubricated type and oilless type.
The oil lubricated type is suitably applied to diverting loads, etc. JMC bearings design and manufacture JF with re-lubrication feed and grease nipples for grease injection.
Since bearing greater than JF20 are large in size, they are subjected to higher loads. In this case, a special spherical plain bearing is manufactured and inserted by taking load and tilting angle into special consideration.

Since duty of bearings greater than JF20 are high, spherical plains are inserted to endure such duty, compared to previous products where brass alloy BUSH and BALL are combined.
Since housing and ball used for this spherical plains are manufactured using heat treated high carbon chromium bearing steel, you can safely use the bearing safely under heavy load.

Since duty of bearings greater than JM20 are high, spherical plains are inserted to endure such duty, as compared to previous products where brass alloy BUSH and BALL are combined.
Since housing and ball used for this spherical plains are manufactured using heat treated high carbon chromium bearing steel, you can safely use the bearing safely under heavy load.

Inch type rod ends manufactured by JMC are oil lubricated types.
Oil lubricated rod ends are suitably applied for diverting loads and others, JMC bearings design and manufacture JM with re-lubrication feed and grease nipples for grease injection.

Oilless inch types are manufactured upon demand.

JFT series are oilless type bearings where special non-lubrication material are formed between steel body and spherical inner ring.
These bearings are mainly applied for smooth tilting motion and are highly stable and semi-permanent without lubrication.

JFTS, on the other hand, have the same specifications as JFT, but are made of stainless steel.
If you still supply lubricants regularly, we recommend you to use oilless rod end bearings.

JMT series are oilless types where special non-lubrication material are formed between steel body and spherical inner ring.
These bearings are mainly applied for smooth tilting motion and are highly stable and semi-permanent without lubrication.
JMTS, on the other hand, have the same specifications as JMT, but are made of stainless steel.
If you still supply lubricants regularly, we recommend you to use oilless rod end bearings.

JFTS have the same dimensions with JFT but are manufactured with stainless steel.

Material used for JFTS is SUS 304 (body) and SUS 440C (body). Various stainless steel may be used for customized orders on demand of customers’ request.

For details, inquire Jalman Precision Co., Ltd.

JMTS have the same dimensions with JMT but are manufactured with stainless steel.

Material used for JMTS is SUS 304 (body) and SUS 440C (body). Various stainless steel may be used for customized orders on demand of customers’ request.

For details, inquire Jalman Precision Co., Ltd.

Inch type rod ends manufactured by JMC are oil lubricated types.
Oil lubricated rod ends are suitably applied for diverting loads and others, JMC bearings design and manufacture JF with re-lubrication feed and grease nipples for grease injection.

Oilless inch types are manufactured upon demand.